Quote:
|
Check that the 10D is set to sRGB in the menu and also check Elements2 to see that you have it set to either sRGB (preferable) or to do not assign a profile. The second option should use the EXIF data for the working space and on saving it use sRGB which should show up correctly for web and everywhere else that does not read colour profiles. Your problem definitely lies with a colour profiling mismatch but Elements is not to blame, it is the only item in your post processing work flow that is behaving correctly.
|
The 10D is set to standard in the parameters bit of the menu. This I assume is SRGB?
What do i need to look for in elements to tell it to do what you suggest?
Quote:
|
Yes, run the application from within the control panel and set up your gamma and colour to match it, it will guide you through several simple screens and instruct you to make slight alterations on the way. Once done it should give you a fairly good base line standard from which you can work or if you prefer you can tweek it slightly.
|
The monitor locks the brigtness etc when you put it into SRGB mode so i can't really do anything with that. Once elements is sorted i shouldn't need to though should i?