[Dabhand16]

FinePix F480 Firmware (camera control software) Update Ver.1.03

Applicable model: FinePix F480

• Detail of the update

The firmware(Ver.1.02 to Ver.1.03) update incorporates the following issues.

1) After taking pictures of the scene under bright condition, such as the picture of sun, occasionally next picture may be shot with underexposure condition.
The firmware update Ver.1.02 incorporates the following improvements.

1) Improve operability for shooting with flash and updates the operability of the camera.

• Precaution

1. If firmware updating fails, the camera may no longer operate correctly. Please read the provided notes carefully.

2. Batteries must be fully charged before updating. Please use an AC adapter (AC Power Adapter AC-5VX and DC coupler CP-40N) if available.

3. Do not turn the camera off, open the battery cover or attempt to use any of the camera controls while the firmware is being overwritten.

4. Firmware updating requires approximately 15 seconds.

5. Once the firmware has been updated, the previous version cannot be restored.

6. If you encounter difficulties updating the firmware, please contact the Technical support & Repair service.

Fuji download page.